Subject: Aircraft Turbo 20B for sale
From: Paul
Date: 1/15/2001, 11:18 PM



I hate it when this happens. Chuck was an early pioneer.
Two in-flight fires in a row is bad news.
It is the goal of this newsletter to avoid this situation and make it
more likely you will be highly successful on your first flight.
I cannot emphasize enough the extreme importance of details.
Plumbing in particular.

Paul Lamar


Paul,  just for record, the first oil cooler failure was on the 6th flight,
and the second was on the 10th flight. I don't think it was really
plumbing, so much as it was a weak oil cooler, and poor placement. The oil
cooler was a cast aluminum type which I would stay away from (use a Mazda
type), and the placement issue was that when it split open oil was carried
onto the hot exhaust which should have been avoided.
Chuck Harbert.


I stand corrected Chuck I will try to remember those flight numbers in the
future.

To add to what I said above I was discussing this today with
Bill Martin up from Mexico on a visit. Bill is building a 13B Side Winder
and near a first flight. 

I happen to mention the shorting wires on magnetos. If these two wires 
break your air cooled aircraft engine will still run. If any one of half
a dozen wires break  in a rotary installation the engine will stop.

It has taken the aircraft industry 70 years to perfect the installation
of air cooled aircraft engines. Hopefully it will not take us that long to perfect
the installation of rotary engines.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org