Subject: Engine oil vs 2 Stroke oil was RE: Injecting Sump Oil
From: Paul
Date: 1/15/2001, 11:57 PM


Paul Wrote:

Big snip


BTW we went over this extensively at least a year ago and mixing two cycle
oil with rotary racing car fuel has been practiced for decades. I also
don't agree with Tracy on the duty cycle of racing cars being more severe
than aircraft use. Tracy lives in flat Florida where it is almost never
necessary
to climb at full power for 45 minutes or so. Racing car use is rarely
above
80% average  duty cycle for road racing and races are 24 hours at most.
And those are rare. True, higher RPM's are reached but only for fractions
of a second.  A rotary racing car engine with more than about
300 hours on it is rare indeed and that includes Star Mazda spec racing
cars.

Paul Lamar


Tracy Crook wrote:

"Flat Florida" has nothing to do with it. The subject was Leon's comments
about near instant destruction of engines when the mixture goes wrong. This
only happens with engine operation near the outer limits of BMEP or RPM.
This just never occures in the real world of aircraft operations.  To my
knowledge, there is not a single example of an OPERATIONAL rotary powered
airplane that is even mildly turbocharged.   We operate them at 6000 rpm or
less and we *never* miss a shift :-)   Any serious racer will tell you that
they don't let the rpm fall UNDER 6000 while on the track. And keep in mind
that on the track the engine can develop full HP any time.  In a full power
climb my engine is down to less than 50% power in about 10 minutes due to
lower atmospheric pressure (at 16,000 ft).  So how is this a harder life
than the race car engine?

Tracy Crook
rws@altavista.net
www.rotaryaviation.com

Keep reading Tracy :-)

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org