Subject: Stalled decent rates in canard aircraft
From: Paul
Date: 1/15/2001, 7:48 AM


Mick wrote> I don't think their instruments were lying...

Mark wrote

Where are the static ports located on an EZE type canard? The VSI could well
be lying (lagging) if located to sense a low Px area under this deep stalled
condition. It should eventually catch up, but probably isn't getting much
attention later in the descent. Pilots sees 1200fpm, pilots back sees the
3500+fpm impact, theory predicts 4800 fpm.


"Perry J. Mick" wrote:

I don't know where it is on the Velocity, but on the Long-EZ it's on the
left side, under the canard or close to it, so you may be onto something.

Good post Mark.
OK I think we can put this subject to bed.


This is my last post on the subject.
--
Perry J. Mick
Mick Duckt N7XR
http://www.ductedfan.com


 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org