Subject: Stalled decent rates in canard aircraft
From: Paul
Date: 1/15/2001, 8:03 AM



Mick wrote> I don't think their instruments were lying...

Mark wrote

Where are the static ports located on an EZE type canard? The VSI could well
be lying (lagging) if located to sense a low Px area under this deep stalled
condition. It should eventually catch up, but probably isn't getting much
attention later in the descent. Pilots sees 1200fpm, pilots back sees the
3500+fpm impact, theory predicts 4800 fpm.

Good post Mark.
OK I think we can put this subject to bed.

Paul Lamar


Guys, friend of mine tried very hard to stall a Velocity over the Everglades
and was succesful :)  In deep stall the propeller develops zero forward
thrust. He had it wide open and nothing changed. Plane pancaked and he
walked away with scratch on the forehead from the compass. The salvage crew
destroyed the plane hauling it out of there.
Bulent

Was it rotary powered Bulent? :-)

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org