Subject: Unusual wear on rotor housing
From: Paul
Date: 1/17/2001, 8:36 AM


Paul wrote:

I find this very interesting. I think it is some how related
to the oil injection. See how the wear pattern spreads out as
the seal progresses towards the combustion chamber.
Note the chatter marks.
One scenario is the oil is not spreading out fast enough after it is injected.
With oil mixed with the fuel this cannot happen.

Paul Lamar

erwin hornemann wrote:

I had an RO 80 years ago and it had the same chatter marks in the same place, the
only
difference was they were much worse than this. Needles to say it stopped running,
and
I did not know that much about these engines at that time. I should have kept it and
put in
a 13B. A well.


I want to emphasize that this wear pattern is extremely rare in a 13B and is obviously
due to apex seal oil injection failure.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org