Subject: 202 mph burning 8.25 GPH
From: Paul
Date: 1/18/2001, 10:04 AM


Great Performance, Tracy!

    Sure gives a benchmark for the rest of us to shoot for.  Still not
in
the air.  I applied for a modification to my airworthiness operating
limitations under the change in 8130.2D which permits you to make
"Major"
mods to your installation and then fly a 5 hour test period and sign
them
off without an FAA inspection.  Worthwhile for us guys always tinkering
with
our projects.

   So I though it would be basically a paper work exercise, but it turns
out
this FAA guy had some doings with rotaries many years ago and is
intrigued.
So instead of just sending my revised operating limitations back
approved,
he wants to inspect the aircraft.  Just the opposite of the Washington
D.C.
Area FAA guy who would not inspect my aircraft when he found out it had
a
rotor engine in it.  Goes to show.

  I see where the Rotary Flyin will be in October this year.  I presume
you
moved it to give me more time to get ready to make it {:>).

  Working on the fuel flow meter so we can compare rates.

Best Regards

Ed Anderson


Yep, I was real happy with the numbers.  Bill did some calcs on what HP I
must be generating based on reasonable SFCs but I don't really have a way to
cross check them.  I have good numbers on HP required at various airspeeds
(from Van's) but they are all measured at sea level.  I was at 14,000 during
that test run.  Hmmm, it just occured to me that my fuel consumption at sea
level is is almost doubled at that speed.  Atmospheric pressure is down
almost half at 14,000 so I wonder if flight effeciency is almost directly
related to pressure altitude?

BTW, the book numbers (160 HP Lyc) RV-4 are 204 top speed (sea level) and
194 cruise at 75% at 7,500 ft.  I'm doing a little better on top speed
(haven't checked it with the latest configuration) but it's around 210.
The interesting thing to me is that speed at altitude does not seem to be
falling off as fast as the RV performance tables predict.  Don't have an
explanation for this yet.

Tracy Crook
rws@altavista.net
www.rotaryaviation.com

That may be due to a higher compression ratio than your typical AC engine. 
When I put the high compression ratio engine in my 182 some AC mechanics I talked 
to  claimed it loses less power at altitude. I have not yet figured out why 
that may be true.

Paul Lamar


The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org