Subject: Aircraft Turbo 20B for sale
From: Paul
Date: 1/18/2001, 8:14 PM


Bill Freeman wrote:

Build a simple test rig and pressure test your radiator(s) and oil
cooler(s) to 1.5 or 2X normal working pressure.  If you pop
one on the ground you'll hate it, but not NEARLY as much as
popping it in the air.  All certified aircraft hose assys are pressure
tested before the shop releases them to the customer.

Have you got AC 43.13-1A and 2A??

Bill


Mike Wills wrote:

  Dont just assume that because you pressure test all of these components
you'll be good to go. An acquiantance with a Lyc powered RV6 had an in
flight oil cooler failure (Setrab) pretty early in his test program. He
pressure tested everything before his first flight and all checked good.
Unfortunately he didnt do a very good job of isolating the cooler from
engine vibration when he mounted it and the aluminum suffered a fatigue
failure. He blamed the cooler rather than his mounting scheme and changed
to a Stewart-Warner. But the lesson is to properly isolate the cooler (and
radiator) from vibration.

Mike Wills


 Excellent point!  I, too, had a mounting problem with my first oil cooler
mounting system.  After cracks developed (looked under the cowl a LOT
the first 200 hours) and were welded, I copied the mounting used on a Piper.
Guess what?  700+ trouble free hours on the cooler.  Don't do things
different from std aircraft practice just to be different.  Careful attention to
vibration is really critical.

Bill

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org