Subject: Aircraft Turbo 20B for sale
From: Paul
Date: 1/18/2001, 9:40 AM


Ken Powell wrote:

I have wondered how you could possibly predict something like an
oil cooler failure.  A perfect installation could still have a
failure like Chuck's.  The only way I can think to guard against
this type of failure is to have 25 to 50 hours ground testing.  Any
other ideas on how to test the integrity of the systems before
flying?  I think that I will develope a checklist of failure points
while I am constructing the firewall forward, and then try to
verify the integrity of each item during ground testing.  Just a
thought.

Ken Powell

Rino Lacombe wrote:

I think that each component, specially radiators should be pressure
tested before installation.  I do not know how much pressure I should
apply to the oil cooler, its working pressure is close to 100 psi,  mabe
150 psi would be enough.  I tested my water radiators at 50 psi.

Rino

That is a very very  good idea and should be added to everyone's pre first flight
check list as it is not possible to get full maximum oil pressure with static
RPM.

Thanks Rino.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org