<snips>

3.  Front end housings - 2 housings showed between .0045' to
.005", the 3rd housing showed .002+" (just a litlle over .002",
just barely perceptible on my dial indicator).
The 3rd housings were the biggest surprise. I expected to lowest
wear here, but actually these showed the most wear by far.  I
thought the front rotor ran cooler?

Todd Carrico wrote:

Cooler may mean "smaller" or "tighter"

tc

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org