James Russell wrote:

Hi all:

        The 3 ways I've seen oil coolers killed ( in racing cars ):

        1) Mounting them by their ears poorly - hanging down only
        using 1 ear per side, etc. Clamping the body in rubber is
        much better ( not using the ears at all ) - but if you're going to
        use the ears - use all 4 ears, long bolts, and spacers to prevent
        crushing.

        2) Not using a backup wrench on the cooler's flats when tightening
        the oil lines. This is the BIG killer.

        3) No ( or not fine enough ) rock screen...

As much as I hate spending the weight, I think I'll use an aircraft
cooler. Racing
coolers are just too thin for my comfort. Just my $.02.

Regards,
James

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org