Subject: Trochoid Wear Patterns was RE: Injecting Sump Oil Take 2
From: Paul
Date: 1/18/2001, 10:27 AM


Leon Promet wrote:

snips..

Interesting conundrum ....  Perhaps it is not metal to metal contact that
is causing the wear/polishing marks?  Maybe it's something else.  I wonder
what that could be??  Have you had a look at the apex seals that came out
of this motor??

I'm told on good authority that there are only two basic things that cause
wear in engines.  Metal to metal contact and what else??  Anybody got any
ideas?  (Hint:  what is an oil filter supposed to do??)

Sincerely,

Leon


It sounds like you are talking about the grit in dirty motor
oil.

Charlie

Need I mention there is never any grit in fresh two cycle oil?
Nor would it be possible to plug the oil injectors with that 
nonexistent grit.

If that don't do it for you I don't know what will? :-)

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org