Subject: Trochoid Wear Patterns was RE: Injecting Sump Oil
From: Paul
Date: 1/18/2001, 10:10 AM


Finn Lassen wrote:

Someone please correct me here. I've been mixing 1 oz of MMO per gallon
of gas
(1:128). But according to the chart about 1:630 (1 oz per 5 gallons)
would be
adequate.

1 cc = 1 milli liter? That's 3785 ml/gallon. At a conservative 10
gals/hr at 5000 RPM
that's 37850 / 60 = 630:1 or about 1 oz per 5 gallons.

Finn

MMO that's your problem right there :-) Should be two cycle oil.

Paul Lamar


One thing to consider when looking at that chart is that it is "Per BANK"
which I think means per rotor.

I have never claimed that premixing the oil is the way to get the lowest
USAGE!  Injecting the oil is more effecient and the best of all possible
worlds is to inject a good two stroke oil.  Until I have the time to
implement this in a reliable way, I will happily premix.

Tracy Crook
rws@altavista.net
www.rotaryaviation.com


 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org