Subject: oil metering adaptor kits? Anyone game?
From: Paul
Date: 1/18/2001, 9:30 AM


Paul said:
Mazda put a bunch of safe guards in the RX7. They took the very unusual
step of installing an oil level sensor in the oil pan on second gen
and maybe third gen engines. They could do the same thing for an aux
apex seal lube tank. Even cut the ignition in the car. Not the airplane:-)
When you run out of gas the car stops. The same could happen
when you run out of oil. Once or twice would be all it would take for
most people.

marc wiese wrote:

Paul,
Those low oil level sensors are on the 3rd 93+ gen engines (I have 2
sitting in my garage out of cars), and on the 20Bs as well!
I do not know why some aftermarket speciality company does not make a kit
to retrofit a tank with one of these level sensors with the necessary
electronics (a bit messy, I'm told) to meter it (of course adjustable flow
rates just for us!). Now, there is an opportunity for someone!
Marc Wiese

Great idea Marc.

I have heard rumors that the 3rd gen stepper motor oil injector cost
over $1200 at the dealer. For that kind of money someone could fix us right
up with your system. A one dollar microprocessor and a stepper motor
(out of a $25 floppy drive) pump with a tap into RPM, throttle position and 
intake manifold pressure sensors would be all it needs.

BTW all cars since 1994 are required to have OBD II. Therefor those  cars 
have this sensor information at the OBD II local area node connector usually 
located under the dash.

Course the EPA/CARB is not going to let you mess with the amount of oil injected
into your car engine. It is not your car to tamper with. They own it and
the EPA/CARB is just letting you use it out of the goodness of their heart.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org