Subject: 202 mph burning 8.25 GPH
From: Paul
Date: 1/19/2001, 4:21 PM

Ken Power wrote:

Kevin,
I am also building a PP engine for my RV-4.  Paul and I worked
out the following design in an effort to boost BSFC, add HP and
to maitain a smooth idle.  We are predicting 210 to 225 HP - no
way of knowing without dyno testing.  This is untested at the
present time, but I will be putting the engine together this
spring.  Note that Paul designed and built the variable intake
that makes this work.  The idea is to vary the port timing with
the throttle opening.  This will allow very mild port timing for
idle and part throttle operation, and aggressive port timing for
WOT.

Ken Powell


Too much to up load Ken so here is the gist of it.
One of the photos looks better upside down.

Looks like I got to get around to cutting those holes in your rotor housings.
Been busy getting my boring head working on the mill and my tig welder up and running.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org

Ken-Powell-periperal-port.jpg

linkage.gif

vartime5.gif