Subject: 202 mph burning 8.25 GPH
From: Paul
Date: 1/19/2001, 4:57 PM


BTW, the book numbers (160 HP Lyc) RV-4 are 204 top speed (sea level) and
194 cruise at 75% at 7,500 ft.  I'm doing a little better on top speed
(haven't checked it with the latest configuration) but it's around 210.

Tracy Crook
rws@altavista.net
www.rotaryaviation.com
Tracy,

I don/t have an RV4 file in my performance program, but it indicates a well built RV6
with well faired gear, requires just under 100 thrust HP at 200 mph 14000 ft. At that
speed a properly sized prop should be about 85 percent or better, or about 110 -115
shaft HP. with Tracy's probably better than average RV4  and that fuel burn, he is
probably about 100 shaft hp - which seems about right. The effective flat plate in the
RV6 case was 2.23 sq ft most of this being parasitic and form drag since the required
lif coeff is abour 0.21 for only about 24 lbs induced drag of a total 185 lbs. Fuel
specific looks like our rough number of 0.5 is almost right on.
Vance
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org