Subject: Digital EGT? (was Re: Rotary A/C Redundancy?)
From: Paul
Date: 1/19/2001, 4:05 PM


 > > Yes, and a digital EGT gauge is mandatory.  The resolution on analog
meters
is not good enough to get a really close match.  I like to get EGT
differential less than 10 degrees at cruise conditions.  Having only two
(or
three on 20B) EGTs to match is another advantage of the rotary :-)

Tracy Crook


Tracy, you mention a digital EGT gauge, what is your source and price for
such a gauge?  My twin needle analog EGT gauge has always shown my two
rotors (on two different engines) to be approx 75F difference.  No, I have
not tried to enrich the lean rotor yet, as I suspect that the difference
could be sensor/gauge related since it appeared on both engines.  Rear rotor
showing the leaner condition (or is it richer) in any case its exhaust temp
is the higher of the two.

Ed Anderson


 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org