Subject: 202 mph burning 8.25 GPH
From: Paul
Date: 1/21/2001, 4:52 PM


Yes, Mike, I am down on power to maybe 150 HP. 153 Knot (170 MPH?) top
speed. I flew along side my 160 HP Lyc. RV-4 once and couldn't keep up. I
need to change my prop or have it de-pitched. I am only turning 5500 RPM
at
max cruise. 4800 RPM take-off. I am thinking about getting an electric
adjustable Ivo Prop.  So far, I haven't gone on any Long cross country
trips, so the top speed has not been all that important to me.

Chuck Dunlap


Chuck, there's some disagreement re IVO props, but a lot of people use them
successfully. I like mine and plan on running one on my new engine, Dave
Atkins has done a lot of testing and likes his which he's flown for over
600 hrs. He also flys over 200 mph in his RV6. At the speeds you're talking
about, I'd suggest you get the new deep pitch version. Also, follow the
torquing specs religiously.

Chuck Harbert

Is Dave going to Sun & Fun this year Chuck? We could solve this IVO controversy
if someone ran one in the Sun 100. I have been checking for IVO props each year and nobody
runs them in the cross country races. Unfortunately Dave entered the race last year
but broke an RV rudder pedal just before the race started.

I got an idea. We could organise a little short race during the rotary engine
Shady Bend flyin next October at Tracy's place. We can send someone out to Cross City
airport or someplace else close by to act as a pylon observer. Standing start from 
Tracy's strip to a 500 foot pass over Tracy's house as a finish line. That would be 
about a 30 to 40 mile race.

Paul Lamar

The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org