Subject: Making a motor mount Plan A
From: Paul
Date: 1/21/2001, 5:33 PM

About a year ago I had planed to use this jig to make my motor mount.
I thought it might be easier to line things up and tack weld them on
the real firewall than use this jig. I think I was wrong and this jig
now seems to be the best way to do it. The use of this jig will become
clear as we go along. It will accommodate any motor mount design less 
than 36 inches wide 24 inches high and 24 inches long.

More later. 

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org

universal-mm-jig.jpg