Subject: Harbor Freight Tools - Quality Tools at the Lowest Prices
From: Paul
Date: 1/23/2001, 11:44 PM



Ed Anderson wrote:

Paul,
    Here is the Harbor Freight tube cutter on sale
Ed Anderson


Lorin Thomason wrote:

Thanks for the pics of the tubing notcher.  I went to the local outlet to
check them out but they had sold out.  So I was unable to see if they were of
good quality.  These pics are much better than the tiny, blurry pic in the
sales paper.  Looks like a decent quality device.  I've been wanting one of
those for some time so I will try another store or get a rain check since the
price is very reasonable.  Of course for steel tubing the hole saw quality
would be of utmost importance.

BTW, Paul, I received your parts in the mail and I'm sorry for the hold up.
I've had to do some rewiring in my garage and that has held me up on finishing
the motor mount cups.  Also, I am beveling the pipe ends so that I can get
maximum penetration which is taking a bit of extra time.  And I didn't have
any 4130 tig rod on hand.  Anyway, I should have them in the mail by end of
week.  Again, sorry for the delay.  I didn't expect them so soon.  I should
have had the wiring done before now.  But it was one of those things that end
up on the end of your to-do list until you need it done.  I hope I haven't
held you up too badly.

Lorin

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org