I'm sorry Paul, I've already deleted the original message with the
pictures. However, I did go down to the shop to get the stock number
off
the ID plate and it is #35782. This tool is in their sale flyer dated
to
end Jan 29, 01, and is priced at $49.99 (Down from $59.99,) but I think
I
only paid $39.99 for it on a sale last spring. I guess the price could
have
gone up :-(
I'm lucky enough to have a Harbor Freight near where I live so I'm
in
and out of there a lot. With most imported tools you need to actually
see
what you're buying because a "picture is worth a thousand lies" in the
marketing business. Another problem that sometimes occurs is that more
than
one company might make the same tool and there can be differences in
quality, but it's usually visible if you're there to see it in person.
Harbor Freight is good about refunds or exchanges, but it's still a pain
in
the back side if you've catalogue or on-line ordered because you have
the
shipping problems.
If you've got anything in particular you want checked, let me know
what
the sku # is and I'll eyeball it when I'm in the store.
Robin
OK that's this one. We have the warehouse/show room near the hanger in
Camarrilo
CA. I can't get up there until thursday however.
Paul Lamar
Paul,
I've got that tube cutter also. It works just fine, the back plate is 3/8"
mild steel. I have abused that thing over the last couple of years and it
still works fine. Just keep the spindle lubed well. I paid $49.
Ken Gillanders
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org