Subject: Mazda bellhousing adaptor plate
From: Paul
Date: 1/26/2001, 2:00 PM


Here is my setup with the standard automatic bellhousing that came with the
engine. I made the adaptor plate which will take tracy's gear box. At least
that's my plan.
Bulent

marc wiese wrote:

Paul,
Is it possible for you adapt Bulent's adaptor to your motor mount style
with the leg cups and have someone machine a few for us needed to give that
type a try? And would Bulent let you? ;=)
Marc Wiese


I have some questions about the bell housing. First of all Bulent has a very
rare 13B Cosmo engine  and along with that a very rare bell housing so his
info is probably not directly related to what most of us are doing.

The big question is the dimension from rear of engine to the adapter 
plate on the stock bell housings because that must be the same as Tracy's 
spacers to use Tracy's input shaft.

If that dimension is compatible it would be possible to make the adapter plate
large enough to also serve as a motor mount bracket. 

The ideal would be a custom bell housing casting such as the one Chris 
Smale made for his PSRU design. Perhaps we can borrow the pattern from Chris
and have a bunch cast.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org