Here is the job it did. Not too bad. The secret is run the
drill press slowly and use a good quality metal cutting hole
saw. The little hole saw adapter that came with the unit had
some run out so you might want to have that fixed by a
machinist.
SNIP
Paul Lamar
Paul, I noticed a can of WD-40 in the picture. Local builder who is a SUPERB
painter (runs a body shop and has painted 3 award winning oshkosh homebuilts)
recommends not having it in the shop because of silicone contamination of the
surfaces causing fisheyes
For what it is worth.
Bill Schertz
KIS Cruiser #4045
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org