Subject: 202 mph burning 8.25 GPH
From: Paul
Date: 1/28/2001, 7:28 PM


BTW, finally got around to doing some performance measurements with
the new
engine & muffler combination.  I was totally jazzed to find that at
14,000
feet I could cruise at 202 mph burning 8.25 GPH (WOT).  Not bad for a
relatively dirty RV-4.

Tracy Crook
rws@altavista.net
www.rotaryaviation.com

Great Performance, Tracy!

    Sure gives a benchmark for the rest of us to shoot for.  Still not in
the air.  I applied for a modification to my airworthiness operating
limitations under the change in 8130.2D which permits you to make "Major"
mods to your installation and then fly a 5 hour test period and sign them
off without an FAA inspection.  Worthwhile for us guys always tinkering with
our projects.

   So I though it would be basically a paper work exercise, but it turns out
this FAA guy had some doings with rotaries many years ago and is intrigued.
So instead of just sending my revised operating limitations back approved,
he wants to inspect the aircraft.  Just the opposite of the Washington D.C.
Area FAA guy who would not inspect my aircraft when he found out it had a
rotor engine in it.  Goes to show.

  I see where the Rotary Flyin will be in October this year.  I presume you
moved it to give me more time to get ready to make it {:>).

  Working on the fuel flow meter so we can compare rates.

Best Regards

Ed Anderson


-Roger Robertson wrote:

Tracy,
What Engine and prop rpm are you turning.  Do you have a manifold pressure
measurement? I've been away from the group for a couple of months so congrats on
your gearbox and getting back in the air
rrobertson-(getting ready to start a RV-9)
- 

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org