You probably already know about this trick.
I had 12 of these little suckers to drill so that meant
48 1/4 inch holes to be laid out and center punched.
That included the plates that go on the back side of the
composite wood and fiberglass firewall to act as large washers.
Yuck. Boring!
So here is a little trick I came up with
30 years ago as I recall. No need to lay them out and center
drill each part individually. If your parts are sheared accurately
no problem. Everything will fit perfectly.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org