Subject: Fuel air bomb waiting to go off.
From: Paul
Date: 1/29/2001, 8:59 AM


This is very bad practice. A string of fitting like this
with a bit of upward acceleration on the fuel pressure regulator
could put a torque on the elbow causing it to come unscrewed and leak.

A pin hole leak in the high pressure fuel system is very VERY dangerous
to say the least. If the fuel mixes in the right ratio with air
an explosion could occur not to mention an in-flight fire.
All it takes is a very small amount of fuel mixed with air
and you have a real big fuel air bomb.

BOOM! There goes your cowling if not the engine. Shutting the
high pressure pump off won't help much as the system will retain
pressure for quite some time due to hose deflections.

What is really bad is the fuel rail in this case is right
above the exhaust and muffler.

The regulator needs to be screwed directly into the high pressure
fuel rail.

Paul Lamar

Ken Powell wrote:

Thank you Paul.  I don't think that I would have seen this error.
I just keep learning from you guys.

Ken Powell

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org