marc wiese wrote:
That Cosmo bellhousing is identical to all 93-95 13Brew automatic
bellhousings and all 20B engine bellhousings (all 20Bs were automatics).
The dimension from the face of the rear housing to the face of the
bellhousing (not including the adaptor plate) on my auto tranny bellhousing
is approx 6-5/8". I do know that one of the manual bellhousings I have from
a 13B cira 1985 or so is 7-5/32". So it depends on what you are using.
How hard is it to make a shaft of different lengths that would fit to mate
to Tracy's redrrive gear housing?
Paul, I do agree it would be nice to have a custom case such as Chris Smale's!
!
Marc Wiese
Ken Powell wrote:
Just a note for Tracy: I LIKE the spacers instead of a
bellhousing - I like seeing what is happening in there!
Ken Powell
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org