First is "vacuum advance" which advances the
ignition timing as the manifold pressure goes down (like at high
altitude or
low throttle). The second is in-flight adjustable static timing so
I can
play with the advance under actual flight conditions.
Tracy Crook
tcrook@rotaryaviation.com
www.rotaryaviation.com
An upgrade but also sounds like a good way for some of us neophytes to
get ourselves into serious trouble. I may need to install a knock sensor
after all.
Mike Wills
Tracy Crook wrote:
Very true Mike. The comment I put in the EC2 instructions should be taken
literaly. "The ability to program ignition advance (and several other
functions) while in-flight is a useful and powerful tool and, like many
tools, it can hurt you if used improperly".
A knock sensor would be a good thing to have if you want to explore the
upper limits of ignition advance, especially when at full throttle.
Tracy Crook
tcrook@rotaryaviation.com
www.rotaryaviation.com
Sounds like time for the Radio Shack single chip audio amplifier knock
sensor and an ear phone.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org