Subject: EC2 and knock sensors
From: Paul
Date: 1/30/2001, 5:50 PM


A knock sensor would be a good thing to have if you want to explore the
upper limits of ignition advance, especially when at full throttle.

Tracy Crook
tcrook@rotaryaviation.com
www.rotaryaviation.com

marc wiese wrote:

For Tracy,
Does you new program in your EC2 accommodate any inputs from the off the
shelf J&S knock sensor readily available or from the stock knock circuitry
in the 3rd gens? I believe I have a wiring diagram here somewhere for the
J&S I have in my 94 rx7. It retards the timing upon detecting incipient
knock. As I am going to turbo I think having one for protection is a good idea.
Marc Wiese (EC2 on order)


 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org