Subject: EC2 and knock sensors
From: Paul
Date: 1/30/2001, 8:00 PM


A knock sensor would be a good thing to have if you want to explore
the
upper limits of ignition advance, especially when at full throttle.

Tracy Crook
tcrook@rotaryaviation.com
www.rotaryaviation.com

marc wiese wrote:

For Tracy,
Does you new program in your EC2 accommodate any inputs from the off the
shelf J&S knock sensor readily available or from the stock knock
circuitry
in the 3rd gens? I believe I have a wiring diagram here somewhere for
the
J&S I have in my 94 rx7. It retards the timing upon detecting incipient
knock. As I am going to turbo I think having one for protection is a
good idea.
Marc Wiese (EC2 on order)


The EC2 does not currently have provision for a knock sensor.  If you can
provide technical specs on the output from the J&S knock sensor or similar I
will look into designing it in.

Tracy Crook
tcrook@rotaryaviation.com
www.rotaryaviation.com

I will bang a stock sensor and tell you what the resonant frequency 
and amplitude is. They are in the audible range. Better yet lest me 
search the CD as I think I have uploaded that info.

Paul Lamar

The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org