marc wiese wrote:
OK, guys, a couple of points here about Knock and The Rotary Engine-
1. It happens faster than you can humanly react
2. It is usually catastrophic-a seal breaks
3. Unless the reaction at "incipient knock" (a hint of the real knock about
to happen) is instanteous, you are at #2 again
4. Get some background from the rotary racers and high performance people
-they have a lot of experience with this situation.
As long as you are not "pushing" the engine (turbo), don't get a load of
bad gas, or have a cool day at the track, maybe you can "forget about it!"
J&S has done the DSP. And, it can be "over-ridden" by external switchable
inputs, however, that is probably when you need it most.
If you blow a seal anytime, your power will probably drop more than the
retard amount would have caused.
Testing is everthing.
Marc Wiese
Will the 4mm ceramic apex seals solve the knocking concerns?
Just wondering
Chris
I don't think so. Ceramic seals are brittle and can be broken with
finger pressure alone. I personally am going with Hurley Engineering apex
seals as they are softer and probably tougher than the Mazda cast iron or
ceramic seals not to mention a whole lot cheaper.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org