I was looking through Norbye's book for the reference on the
angular acceleration of the rotary when I noticed the butterfly
in the peripheral port rotor housing of this Mercedes Benz
three rotor. And I thought Everett Hatch of Power Sport invented it.
Note too the direct fuel injection into the rotor housing.
With side exhaust and intake ports this 1960's rotary engine would be quite
advanced by today's standards.
Paul Lamar
marc wiese wrote:
Is that the 1969 MB C111 engine that made 320hp?They also made a 4 rotor
for the C111 that made 405 hp! Supposedly the direct fuel injection cured
low speed operation-not one of our problems! (unfortunately they dropped
those 2 engines and went to using a diesel in the C111!!!! The car never
went into production. It had peripheral intake ports and direct fuel
injection with two Bosch mechanical injectors per chamber. Wonder if MB has
them in their museum?
Marc Wiese
The 330 HP at 7000 RPM three rotor weighed only 309 pounds.
All Al nica-sil end housings. Would that make a nice aircraft engine
or what?
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org