Subject: MB Butterfly in rotor housing.
From: Paul
Date: 2/6/2001, 11:59 AM


The 330 HP at 7000 RPM three rotor weighed only 309 pounds.
All Al nica-sil end housings. Would that make a nice aircraft engine
or what?

marc wiese wrote:

You bet! If Porsche tried with one of their old base VW designs to make an
aircraft engine, then MB ought to be able to do something with this! MB
ought to drag it out and try it again (in airplanes, if nothing else)! With
the materials and technology improvements since 1969, it might just be a
winner.


  The Porsche aircraft engine (indeed, no Porsche engine since the early
50s) has **nothing** in common with VWs other than air cooling and
being a horizontally opposed piston engine.  It is/was based on the 911 flat
6 which is *EXTREMELY* durable - **many** Daytona/LeMans 24 hr class
and overall wins over the last 30+ yrs. You might as well call a 520
Continental
a VW based design.  I've built *many* VWs (car/ few airplane) and own a 911
and fly two Continentals and a Lycoming.

If you want to really do the *right* thing for an aircraft rotary, you need
to learn
from many years experience with piston aircraft engines.  You need a big
enough displacement engine to make your required HP at 2800 RPM max
and you need to air cool it.  These parts of the aircraft engine optimization
over the last 50+ yrs *are* correct.  Water cooling is subomptimal as is a
geared
engine.   No offense on the Mazda - it is the only thing available.  I am only
talking about a multimillion $ clean sheet of paper design.  Near zero
probability, but an aircooled, direct drive, peripheral ported two rotor
with proper thrust bearings designed in and burning two-stroke oil injected
from a separate tank, with a fuel and ignition system like Tracy's would
be *EXTREMELY* good and would really be a new breakthru in aircraft
motors.   Dream on.  In the real world the Mazda can be made to work,
we all need to make the best and safest systems to keep the whole installation
as reliable as the core engine.

Bill
Long EZ builder & pilot
mechanical engineer

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org