Yvon Cournoyer wrote:
At first, I flew my 13B with the standard metering oil pump (locked at
maximum oil output), and that went well, never noticed the engine loading up
with a surplus of oil. The sparkplugs did not foul up either. Then I had an
in flight partial failure of the system. Upon landing I noticed a slight oil
drip and found that one of the four oil hoses (one from the metering pump
to the housing) had melted through. I added a heat guard and repaired the
hose. Later I read Tracy Crook's book and newsletters and joined the ACRE
and FLYROTARY newsletters and learned about 2-stroke oil in the fuel and
the drawbacks associated with burning 4-stroke engine oil. I was glad to
remove the metering pump, as I did not trust that system. I do not think I
ever forgot to add oil in the fuel. I always carry a container of oil in the
aircraft and that is an excellent reminder. I agree that placards are also
necessary reminders. Unless I hear an overwhelming reason for it, I will not
go back to using the metering oil pump.
Yvon Cournoyer
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org