> > > >You would be better
> > >off with separate radiators. The heat transfer from oil to water
> > >in that radiator is designed for a piston engine that has a
different
> > >heat balance than a rotary. In other words less of the cooling is
> > >done by the oil in a piston engine.
> David Doshay wrote:
> >
> > After what happened to Chuck Harbert I would not touch a Griffin
> > product, but just for a point of reference, Mazda Racing sells an
> > oil to water radiator. Cost: about $3k.
> >
> > David--
I have been beating on a Griffin aluminum radiator in the race car
for 5
years, including plugging an outlet and adding
another. No problems. I have not seen a Griffin oil radiator even
advertised.
Lynn E. Hanover
Likewise, I have a little Griffen rad that was used on a
turb-suzuki. Only ran on the ground and was never flown. However,
the rad is a fine piece of work. Griffen in-rad oil coolers are in
their catalogue with the racing radiators.---Jerry
Sounds like the oil cooler I'm talking about is a different design than the
Griffen everybody else is discussing. The one in the Mazda competition parts
catalog uses radiator water to cool the oil. Sounds like the Griffen has both
oil and water channels in a radiator which cools both with air. Do I understand
correctly?
David
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org