> > > >You would be better
> > >off with separate radiators. The heat transfer from oil to water
> > >in that radiator is designed for a piston engine that has a different
> > >heat balance than a rotary. In other words less of the cooling is
> > >done by the oil in a piston engine.
> David Doshay wrote:
> >
> > After what happened to Chuck Harbert I would not touch a Griffin
> > product, but just for a point of reference, Mazda Racing sells an
> > oil to water radiator. Cost: about $3k.
> >
> > David--
I have been beating on a Griffin aluminum radiator in the race car for 5
years, including plugging an outlet and adding
another. No problems. I have not seen a Griffin oil radiator even
advertised.
Lynn E. Hanover
Likewise, I have a little Griffen rad that was used on a
turb-suzuki. Only ran on the ground and was never flown. However,
the rad is a fine piece of work. Griffen in-rad oil coolers are in
their catalogue with the racing radiators.---Jerry
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org