> David Doshay wrote:
> >
> > After what happened to Chuck Harbert I would not touch a
Griffin
> > product, but just for a point of reference,
David, you might have missed the email in which I said that the oil cooler
I got from Griffin was not made by them. I have a water radiator from them
and it is good construction. Al Geitzen had them make an oil cooler that
looks good. I think Griffin "makes" good radiators, but they do sell
another manufacturers oil cooler that is inadequate for aircraft
application.
I just saw something that I think might work well for turbocharged engines
running high boost (at higher altitudes). Lotus get's 300 hp out of a 2.2
liter (134 cu.in.-4 cyl) engine by running 15 lbs of boost. I use about 11
degF per lb of boost, so that would be adding 165 degF to the incoming air
temp. This is too much temp increase, and since they didn't have room for a
big air to air (a/a) intercooler, they built a seperate water (glycol)
system to cool the incoming air ( aka charge cooling (CC)). It's basically
2 water to air radiators and a small pump. Very compact and efficient. I
tried figuring out how to get enough room and airflow into an intercooler,
but gave up. I think I could have done it with a separate CC system because
of the smaller radiators and just running small hose, not big air tubes.
I wonder if there are advantages of CC over a/a intercoolers. Anybody have
any experience with these?
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org