Subject: Universal motor mount jig
From: Paul
Date: 2/8/2001, 1:50 PM


 > >I should have read Richard Finch's book Performance Welding
 >before I designed my motor mount jig.
 >
 >Paul Lamar

Jerry Hey wrote:

 Paul,  here are a few pic of my engine mount fixture.  This is for a
 dynofocal  mount in the Tailwind.  The fixture is complicated by the
 gear receivers.  It gives a feeling for the weight and strength that
 such a  fixture requires to resists warping forces.   The rectangular
 tubing is 1.5 x 3 and 1.25 sq.    Jerry

Thanks for the pictures Jerry. Looks real stiff.
BTW what do you have to pay for those dynofocal mount rubber bushings?

Paul Lamar


I've never bought any.  I started building  just the gear mounts and
a number of people wanted the dynofocal ring added so I added that
feature.  I have a set of  junk dynofocal cases to which I attach
the dynofocal ring and this assembly is bolted to the pads on the
fixture.  Steel spacers replace the rubber bushings.  Takes two
days to build a complete engine mount.  Although I have TIG, I much
prefer to use the torch.  Aside from the technical reasons, the
torch is sooo pleasant to use.  Almost no noise,  goggles instead of
a helmet and it proceeds at a comfortable pace.  Somebody else in
another post said he loved his torch that he had had for many years.
I can understand.  Gas welding is an art.   I have the little Smith
and it is my favorite tool, too.    Jerry

My first exposure was to brazing mild steel race car space frames back in the early
60's and then to heliarc. At Chaparral in the late 60's we did nothing but 
heliarc and when I startedmy own race car wing and custom car building in 
the early 70's about all I used was heliarc. Course that was 30 years ago 
and things have changed since. Now square wave tig is all the rage for aluminum.  

I kind of worry about that distortion you would get applying all that excess 
heat with a torch :-) The other thing I worry about is finding the time to acquire
the skill a torch demands. The tig sellers keep telling us it is real easy
and you have much better control.

BTW what is the hot tip for an auto darkening welding helmet? People swear
they make tig welding much easier.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org