Subject: Water oil heat exchangers.
From: Paul
Date: 2/8/2001, 10:35 AM


 This is the reason I originally wanted a much larger radiator.  I
simply added the ideal core areas of the radiator and the Mazda oil
cooler together, added 100 cu in for good measure and came up with
1000 cu in to handle all the cooling.  Maybe my thinking is wrong in
this.  Seems too simple.  Anyway, the single rad does not weigh as
much as separate rads and an oil cooler and I still am hopeful of a
clean installation in the fuselage.   Thanks for your imput.   Jerry

 Ken Powell wrote:

Jerry,
I republished this attachment from Fred Morino last week in response
to your cooling questions.  I thought that I would send it to you
again in case you missed it.  I expected questions to the group from
the new guys but none were asked.

Ken Powell

Barnhart wrote:

Is there a way to extrapolate Freds data to the 20B?

Barny

Good question. You probably would get in the ball park by multiplying 
everything by the ratio of the actual HP needed compared to the 13B 
HP needed to go that speed. Including drag. For climb at a given FPM  rate
it would probably be the ratio of the gross weights more or less.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org