I should have mentioned this sooner, but I tried the oil to water cooler
deal. I have a big Callies (the crankshaft people) oil to water exchanger.
I
works fine.
It is also heavy and it dumps a ton of heat into the water. It makes you
need a bigger, heavier radiator.
I now have three Setrab oil coolers. Two in series in the scavenge side
and
one in the pressure side. No problems. Lynn E. Hanover
My Setrab oil coolers are all part number 50-634-4063. The core is 10 1/4"
tall.
It is 11" wide but 13" including the mounting tabs. It is 2" thick. The max
pressure is 10 bar, or 147 PSI. Cost is $270.00. Available from "Truechoice"
at (800) 388-8783.
Or, www.truechoice.com. You must specify the outlet size you want.
Lynn E. Hanover
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org