Subject: Universal motor mount jig
From: Paul
Date: 2/9/2001, 9:02 AM


My first exposure was to brazing mild steel race car space frames
back in the early
60's and then to heliarc. At Chaparral in the late 60's we did nothing but
heliarc and when I startedmy own race car wing and custom car building in
the early 70's about all I used was heliarc. Course that was 30 years ago
and things have changed since. Now square wave tig is all the rage
for aluminum.

I kind of worry about that distortion you would get applying all that excess
heat with a torch :-) The other thing I worry about is finding the
time to acquire
the skill a torch demands. The tig sellers keep telling us it is real easy
and you have much better control.

BTW what is the hot tip for an auto darkening welding helmet? People swear
they make tig welding much easier.

Paul Lamar

Paul, I could not TIG (or mig or stick)  weld without my auto
darkening helmet,which was purchased almost the first day they came
out at least 10 years ago.  Vision is everything in welding.  TIG is
good for welding anything that you can get a good comfortable
position on. It is not so wonderful when you are crawling around a
fuselage. I find it impossible to do out of position welds such as
overhead with the TIG. Distortion is just as great with the TIG as it
is with the torch in my opinion.

  What you call "excess heat" from torch welding can be an asset
when it comes to stress relieving.  The process becomes second
nature, after a while; just a few moments more with the torch after
the weld is completed.  Of course, one could go back over completed
TIG welds with the torch to stress relieve them, but I don't know
anybody who does this in reality.  Thousands of accurately built
aircraft have been welded up by first timers using the torch. This
skill builds rapidly.  TIG seems easier until you come to the less
than perfect joint, Of course a good TIG man can handle just about
anything.  I've been trying for years but have not attained that
ability.  For me,  the TIG is usually reserved for welding at the
bench where  the object is small enough to manipulate and the
welding is downhand.   By the way, TIG brazing is wonderful.  Clean,
no flux,  strong and relatively  low heat.  4130 x .035 tubing will
tear before one of these brazes breaks. I think it could be used for
the entire airframe including the engine mount though I am not
recommending this to anyone.  Be sure to use TIG brazing rod.   Jerry

Jerry

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org