Subject: Water oil heat exchangers.
From: Paul
Date: 2/9/2001, 11:41 AM


Mike thanks for your comments.  The rad/oil cooler combo I was planning on is the same rad  used on the NASCAR  BUSCH Grand National cars.  I don't know how much HP they produce but it is a lot more than my 200 (in my dreams) max.  I figured, if it worked for them,
surely it would work for me.   Like you say, I can always supplement this system with another oil cooler if necessary.(Come to think of it, I don't know that the rad/oil cooler is the only oil cooler in the BUSCH cars.)  Does anybody out there have the full picture on how these cars cool their oil? I'm still very happy to have enough space to be talking about these options.
Jerry


The Winston cup cars now have 750 HP unrestricted and
650 HP restricted. I don't know about the Busch cars but they have less power. The new Dodge has an oil radiator just short of the same width as the water radiator (maybe 34 inches) by 8 inches by 2 1/2".
In the picture i'm looking at there is no oil cooler in the end tank. interestingly, where the radiators used to be four rows of one inch tubes deep. This picture shows single tubes maybe four inches deep, 34 tubes.
My guess is that the water radiator is well over $1,000.00. Lynn E. Hanover

Four inches thick would probably work fine at 200 MPH since dynamic 
pressure is four times what it is at 100 MPH. I wonder how long it will
be before some one discovers the bell shaped inlet duct in NASCAR?

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org