Subject: Report on Ed Anderson airplane
From: Paul
Date: 2/10/2001, 9:17 PM


  Using the stock Mazda three port throttle body (holes approx 45 mm
dia).
Take off Manifold pressure is 28.5 " Hg field elevation 565 feet.

Ed Anderson


I think the intake manifold pressure is a bit low. I would need to see the
barometric pressure for that day. Perhaps your air cleaner is the problem.

Ed could the input shaft and sun gear have some sort of run out? Have you
put it
in V blocks and checked it with a dial indicator? Tracy also noticed some
weird
wear on his Ross that could have been caused by run out in the input shaft
sun gear combination.

Paul Lamar



Paul,
I have never measured the shaft for run-out, so possibility exits that it
may have some.  I'll try to remember to check it next time I have it apart.
We will see how the regular seal works now that I have a much lower oil
drain back to the sump and the pan venting properly again.

Ed Anderson

Also Tracy has ram air to his intake without an air cleaner which
might be helping him at top speed.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org