> Here is the low height pump mounted on the engine.

 I just love that cute little pressure cap :-)
 As you can see this one has a hose barb. As soon as I get some
 reasonable priced wiggins couplings I am going to weld them on.

 > Paul Lamar

No photo with this message.  What does it look like?.  Is this a
commercial item? I think I need one.  Jerry

No I made it myself Jerry. I farmed out the welding however.
The pressure cap and fitting is stock 13B. 
I used a long four inch mill to mill out the old partition. I then
had welded in a 1/4 inch plate to block off the old bypass.
Let me me know if you need a step by step on how to make this.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org