snips
The o-rings fits is 3/4"D x 1.6mm deep grooves. I've tried different
o-rings from Home Depot, o-ring sets, etc. but none seems to keep their
elasticity and I still have an annoying oil seep between engine pad and
oil filter adapter (actually a home made cover).
BTW, how thin and short do you let the electrodes in the spark plugs get
before you replace them?
Finn
Chuck wrote:
Hi Finn
I got my NGK spark plugs at the local Checker auto parts store for $5.00 ea.
No noticeable wear yet after 80 hours.
I don't use the O rings in the oil filter bypass cover I made. The cover is
just a slot milled in 3/2 [1/2?] 6061 bolted to the rear flywheel end housing with
red Permatex sealing it- no leaks.
Chuck Dunlap
Finn, are you sure you do not have a small crack in the end housing? Early 13B's
are known for this problem in this area when detonation occurs.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org