Paul,

A number of years ago I purchased a set of plans for Gyrodynamic Systems
Planetary PSRU.  This unit was designed to use Corvair gear parts. (I think
the typical Ford parts might be better suited)  After purchasing the plans I
sent numerous letters to them asking if they had any information regarding
the horsepower rating of the unit and never received any response.  A few
years ago, I was able to speak with Ben Owen with the EAA concerning this
unit.  He was familiar with the plans and only knew that there had never
been any usage that he was aware of and he gave a strong warning to be VERY
careful if I were to try using it.  Have you ever known anyone that has been
successful with this unit  with anything other than a Volkswagon or Corvair
engine?  Thanks.

Dave Kuc

Not me. First I have heard of it. If you can get them reduced at Kinko's
and scan them in I will take a look.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org