BTW Jerry, the trick to designing motor mounts is make a quarter
scale model out of 3/16 square balsa first. You can learn a tremendous
amount about space frames by doing this. Just a little bit of hand
pressure on the model will show errors in tubing placement.

In this model the hard points shown on the firewall are beefed up by the
designer (Vance) of the Kis Cruiser kit for purposes of attaching the
motor mount.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org