Subject: Quality Engines and Components from Reputable people in Australia was RE: New Zealand Japanese imported engine for sale!!
From: Paul
Date: 2/18/2001, 2:33 PM

Leon Promet wrote:

Hi Paul,

Back again.  You wrote earlier today:

I am still looking for a 91 turbo and exhaust manifold.

Serious question.  How many do you want??  I assume you are talking about
the twin scroll ones??  I'm sure I can track down another one.   If you
want the manifold, you can have one gratis, just pay the freight!!

We throw the manifolds away here because they don't fit in right hook cars
and are as heavy as Sin to boot. The turbo fouls on the steering box.   I
threw 2 out the other day in a clean up!!    You would be better off
getting one of those AirResearch ceramic ball bearing replacement turbos
off a Nissan GTR 4WD.  Additionally,  the engines work better with a bit of
length in the exhaust runners.

I've just fitted up two or these AirResearch units on a 13B in the latest
project.   I paid $2,100 AUD each,  and they came from the US in the first
place.  Don't have the part # here right now, (will get it for you
tomorrow), but they are rated at 320 BHP at 1 Bar of boost.  I'd be getting
one of those,  and making a nice custom Stainless manifold,  which is what
I will probably do for my first aero conversion.  HEAPS lighter!!

SECOND HAND ROTARY PARTS

I have a very close friend who runs a large Japanese car parts importing
business.  ("Japanese" Joe Evans from SSS Automotive in Girraween in
Sydney).  I have known Joe for nearly 10 years.  Joe is a reputable dealer,
 and has been in business for about as long as I have known him.  He runs
full page ads in most of the local cars mags here in OZ.

In fact,  I bought some of his first shipment from him back in early 1992.
  I'm on my way out there to see him tomorrow for some stock for
rebuilding,  so I'll grab a few shots of his warehouse,  engines etc and
send them to you.  He can arrange to have whatever you want crated and
shipped. Air Freight consolidators are surprisingly cheap.  Joe runs full
page ads in most of the local cars mags here in OZ.

He currently can supply ex-stock,  complete !3B twin sequential turbo
engines (ex Cosmo Sedans)  complete with factory looms,  computers,  air
flow meters,  coils and igniters.  $3,500 AUD FOB.  All these motors have
been test driven in Japan before removal from the cars,  and carefully and
mothballed and sealed against contaminants.

He also has a 20B available for $7,500 AUD. This could be shipped directly
from Japan if any one is interested.  It has just purchased and still
running in a car in Japan. Engines can be supplied of all useless
ancillaries, (aircond,  powersteer  etc)  for cheaper freight.

These are not junk engines. They drive them,  pressure test them,  and then
remove them from the vehicles Joe only buys the best,  pays top dollar for
it,  so his prices are considerably dearer than other importers.  But the
stuff is really first rate.  90% of all engines are from whole cars.

Joe has his partner on the ground in Japan right now,  and Joe himself is
going over there at the beginning of march to assist the stripping of the
vehicles and packing of his containers.  He doesn't trust the locals!!!

He can't see the point of shipping either inferior or damaged stock.  SSS
Automotive also have excellent shipping and Customs agents arrangements,
 and can ship anywhere in the world.

RECONDITIONED REBUILT & PORTED ENGINES

I now have facilities again, and I am now in a position to supply rebuilt
or fully reconditioned engines,  with or without porting.  I can supply
them with or without engine management systems and engine dyno sheets. POA.
 Still working up a price list.  Website coming up soon.  Talk to me.


Best wishes & kindest regards,

Leon Promet

I just need one stock set in perfect condition Leon. No cracks. Turbo and exhaust 
manifold. I am not sure they are twin scroll but I guess they could be. If they are 
double scroll both openings should be the same size.  There is only one hole in 
the 1989-1991 exhaust  manifold where the turbo bolts on. There is no 
flapper valve such as shown in this picture of the 86-89 version of the exhaust
manifold. Note the cracks. 

Send me a picture of what you have.

How much in US funds and what does it cost to ship to CA?

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org

turbo-flapper-valve.jpg