Ok Paul,
    A beer the next time we meet  - in return for the part number for

the

outer coolant "O" ring {:>).  Between Ken, and me, we  have the oil

control

"O" rings in both Teflon Encapsulate Silicon and Viton.

Ed Anderson

The problem is Ed, the ones I sent Tom were bought from All O-Rings and

they

do not use standard nomenclature or part numbers

.... SNIP
. Use the slot depth and add about 20% for squeeze and that should

give you the section diameter.

Paul Lamar

Ok, can do.  Did not realize it was not a McMasters "O" ring.

Thanks

Ed Anderson

I suspect they are all made by Creavey. Just each reseller puts his own
part number on it. BTW Creavey told me they would sell direct.
You might call them for prices.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org