Subject: Virtual variable lenght exhaust pipes
From: Paul
Date: 2/20/2001, 11:49 AM


Ed Anderson wrote:

 Hi Paul,
     Just doing some research when I came across this interesting topic.  It
 appears (if I understand this correctly) that you can construct a virtual
 adjustable length exhaust system by injecting water into the exhaust
 headers.  Apparently injecting various amounts of water changes the density
 of the gas mixture in the exhaust and therefore the speed at which the
 exhaust pulse travels and therefore the timing of the pulse arrival at the
 exhaust port.

   So hook this up.  fire up the engine and then adjust the amount of water
 (density of exhaust gas) until you get a peak and - Vola! max hp with a
 virtual tunable length exhaust system.

   For your interest material can be found at
 http://www.factorydirectperformance.com/42591.pdf

 Ed Anderson

Alfonso Lebron-Berges wrote:

I found it very interesting but remembering the years when I was
hobby-building expansion chambers for racing motorcycles I think if
my memory isn't wrong, that for high rpm tuning the chambers were
long & of thin diameter and just the opposite for low rpm tuning
(i.e. trials motorcycles). Another thing that caught my attention was
that they postulate a slower transmission of the wave with increased
exhaust gases density. I thought that cooler and denser gases should
allow for better and faster transmission.

One final thought. How much water would be consumed (weight) in a
three to four hour flight? Maybe Ed has the numbers?

Corrections are welcomed.

Alfonso Lebron-Berges


The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org