BTW Neal don't forget to add a drip rail
to your top fuselage or you will be wet when it rains.
You use the fuselage to lay up this drip rail over a wax mold
all around inside the top and sides of the door openings.
Makes sure the rubber seal is glued to the fuselage and not the door.
It should be impermeable as well.
Something Vance and Rich forgot when they designed the kit mold :-)
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org